For Better Performance Please Use Chrome or Firefox Web Browser

Talks in the international conferences

  1. B. Behdadfar, A. Kermanpur, H. Sadeghi-aliabadi, S. Veintemillas-Verdaguer, J. Ruiz Cabello, M. del P. Morales, M. Mozaffari; "Gd and Zn Co-Substituted Magnetite Nanoparticles as High T2 MRI Agents", 5th European Conference of the International Federation for Medical and Biological Engineering (IFMBE), Vol. 37, Budapest, Hungary, pp. 1370–1373, 2011.
  2. F. Forouzan, A. Kermanpur, A. Najafizadeh and A. Hedayati; "Effects of Anealing Conditions for Developing Ultrafine/Nano Grained 304L Stainless Steel By Artificial Neural Network Modeling", 3rd International Congress on Nanoscience and Nanotechnology, University of Shiraz, Shiraz, Iran, 9-11 November, 2010.
  3. H. Ghazvinizadeh, M. Meratian, A. Kermanpur, M.H. Fathi; "Effect of Casting Parameters on Wear Behavior of ASTM F-75 Cobalt-base Alloy", International Conference on Materials for Advanced Technologies, Singapore, 28 June - 3 July 2009 (Abstract # A00011-00458).
  4. H. Minouei, M.H. Fathi, M. Meratian, A. Kermanpur, H. Ghazvinizadeh; "Surface Bioactivation of Cobalt-base Alloy During Investment Casting Process", International Conference on Materials for Advanced Technologies, Singapore, 28 June - 3 July 2009 (Abstract # A00008-00438).
  5. F. Forouzan, A. Kermanpur, A. Najafizadeh and A. Hedayati; "Processing of Nano/Submicron Grained Stainless Steel 304L by an Advanced Thermomechanical Process", 2nd International Conference on Ultrafine Grained and Nanostructured Materials, University of Tehran, Tehran, Iran, 14-15 Nov. 2009.
  6. S. Soroush, H.V. Dastjerdi, M. Rezazadeh, A. Kermanpur and M.H. Abbasi; "Titania Coated Functionally Graded Alumina Membranes: Synthesis and Characterisation", 3rd Int. Symp. On Catalytic Processes on Advanced Micro- and Mesoporous Materials, Black Sea Coast, Bulgaria, 6-9 September, 2009.
  7. A. Kermanpur, V. Tari, E.H. Dehkordi; "Effect of Impurities on Microstructure, Mechanical and Fatigue Properties of Aluminum Alloy 7075-T6 and 7075-RRA", Iran International Aluminum Conference (IIAC2009), Tehran, 22-23 April, 2009, pp. 349-353.
  8. V. Tari, A. Kermanpur; "Improving Mechanical and Fatigue Properties of Forged Aluminum Alloy 7075 by Retrogression and Re-Aging Heat Treatment", Iran International Aluminum Conference (IIAC2009), Tehran, 22-23 April, 2009, pp. 242-245.
  9. A. M. Parvanian, A. Kermanpur, B. Niroumand; "Numerical simulation of effective parameters on fluidity of semisolid A356 aluminium alloy", Iran International Aluminum Conference (IIAC2009), Tehran, 22-23 April, 2009, pp. 16-19.
  10. H. Ghazvinizadeh, M. Meratian, A. Kermanpur, M. Fathi; "Effect of Mold Temperature on Microstructure and Hardness of an As-cast Biocompatible Cobalt Base Alloy", Annual Meeting and Exposition of Society for Biomaterials, San Antonio, Texas, USA, 22-25 April, 2009 (Poster # 566).
  11. A. Kermanpur, M.R. Dadfar, B. Nekooei Rizi; "Application of Electromagnetic Levitational Gas Condensation Method for the Synthesis of Aluminium Nanoparticles", 2nd International Congress on Nanoscience and Nanotechnology, University of Tabriz, Tabriz, Iran, 28-30 October, 2008.
  12. E. Ghassemali, M. Askari-Paykani, M. Nasr-Esfahani, A. Kermanpur, A. Najafizadeh; "Evolution of Mechanical Properties in a Low Carbon Steel During Cold-Rolling and Subsequent Annealing", 2nd International Congress on Nanoscience and Nanotechnology, University of Tabriz, Tabriz, Iran, 28-30 October, 2008.
  13. A. Hedayati, F. Forouzan, A. Najafizadeh, A. Kermanpur; "An Advanced Thermo-mechanical Process to Obtain Nano/Submicron Grain Sizes in a Metastable Austenitic Stainless Steel", 2nd International Congress on Nanoscience and Nanotechnology, University of Tabriz, Tabriz, Iran, 28-30 October, 2008.
  14. A. Kermanpur, M.R. Dadfar, M. Eshraghi; "Synthesis Of Aluminium Nanoparticles By Electromagnetic Levitational Gas Condensation Method", 1st International Conference from Nanoparticles & Nanomaterials to Nanodevices & Nanosystems (IC4N), Halkidiki, Greece, 16-18 June, 2008.
  15.  A. Kermanpur, V.H. Dastjerdi, E. Ghassemali, M.H. Abbasi; "Nanoporous Titania-Coated Alumina Membranes: Sol-Gel Synthesis And Characterisation", 1st International Conference from Nanoparticles & Nanomaterials to Nanodevices & Nanosystems (IC4N), Halkidiki, Greece, 16-18 June, 2008.
  16. E. Ghassemali, A. Kermanpur, A. Najafizadeh; "Microstructural Evolution In A Low Carbon Steel During Cold Rolling And Subsequent Annealing", 1st International Conference from Nanoparticles & Nanomaterials to Nanodevices & Nanosystems (IC4N), Halkidiki, Greece, 16-18 June, 2008.
  17. S. Rahmanian, J. Kadkhodapour, S. Ziaei-Rad and A. Kermanpur; "Thermo-mechanical Analysis and Microstructural Evolution in Hot Strip Rolling", IX International Conference on Computational Plasticity (COMPLAS IX) , Barcelona, Spain, 5-7 September, 2007.
  18. A. Kermanpur, H. Sepehri Amin, S. Ziaei Rad, N. Nourbakhshnia and M. Mosaddeghfar; "Failure characterisation of Ti6Al4V gas turbine compressor blades", 3rd International Conference on Computational Methods and Experiments in Material Characterisation (Materials Characterisation 2007) , Bologna, Italy, 13-15 June, 2007.
  19. A. Kermanpur, E. Ghassemali, S. Soroush, S. Salemizadeh, M. Rezazadeh and B. Daneshian; "Synthesis and Characterisation of the Titania-Coated Alumina Membranes by a Sol-Gel Dip-Coating Process", Proc. Conf. on Nanotech Insight 2007, Luxor, Egypt, 10-17 March, 2007.
  20. A. Kermanpur, E. Ghassemali, S. Salemizadeh, M. Rezazadeh and S. Soroush; "Dip-coating Process of Nanoporous Titania on Anodised Alumina Membranes by Sol-Gel Method", 1st International Congress on Nanoscience and Nanotechnology, University of Tehran, Tehran, Iran, 18-20 December, 2006.
  21. A. Kermanpur, A. Hajipour and Sh. Mahmoudi; "Numerical Simulation of Fluid Flow and Solidification in the Casting of an Automotive Flywheel Part", 14th Annual (International) Mechanical Engineering Conf., Isfahan University of Technology, Isfahan, Iran, May, 2006.
  22. P.D. Lee, A. Kermanpur, M. McLean, S. Tin, and M. Rist; "Integrated Modeling for the Manufacture of Ni-Based Superalloys Discs from Solidification to Final Heat Treatment", European Conf. for Aerospace Sciences, Moscow, Russia, 4-7 July. 2005.
  23. A. Kermanpur, D.G. Evans, R.J. Siddall, P. D. Lee, and M. McLean; “Effect of Process Parameters on Grain Structure Formation during VAR of INCONEL Alloy 718”, Proc. Int. Sym. on Liq. Metal Proc. & Casting, Nancy, France, 21-24 Sept., 2003, 39-47.
  24. A. Kermanpur, M. Rist, S. Tin, J. Brooks, P. D. Lee, and M. McLean; “Integrated Modelling of Grain Structure Evolution during the Complete Manufacturing Route of Gas Turbine Discs”, EUROMAT2003 Conference, Ecole Polytechnique Federale de Lausanne, Lausanne, Switzerland, 1-5 September, 2003.
  25. W. Wang, A. Kermanpur, P. D. Lee, and M. McLean; “Simulation of Grain Selection in Nickel Based Superalloys”, Int. Conf. on Multiscale Materials Modelling, Queen Mary, University of London, 17-20 June, 2002.
  26. W. Wang, A. Kermanpur, P. D. Lee, M. McLean, X. Wang, R. M. Ward and M. H. Jacobs; "An Investigation of the Effect of Perturbations on Dendritic Growth in Nickel Base Superalloys", Proc. Int. Sym. on Liq. Metal Proc. & Casting, Santa Fe, New Mexico, 22-24 Sept., 2001, 267-279.
  27. A. Kermanpur, F. Khodabandehloo, N. Varahram and P. Davami; "Numerical Simulation of Bridgman Casting Process in Axisymmetric Geometry", 4th International and 8th Annual Conference of Mechanical Engineering (ISME 2000), Sharif University of Technology, Tehran, Iran, May 16-19, 2000, 377-383.

تحت نظارت وف ایرانی