Spark plasma welding joining of copper-AISI4140 steel: Microstructures and mechanical properties |
October |
2023 |
Enhancing hot oxidation resistance of the HVOF-sprayed NiCoCrAlTaY coating by alumina nanoparticles via a modified suspension route |
January |
2023 |
Microstructure and hot tensile behavior of Hastelloy X superalloy laser powder-bed fusion-fabricated through different scanning patterns |
March |
2023 |
Solidification behavior and microstructural features of the cast and HIPed N-bearing Ti-48Al-2Cr-2Nb intermetallic alloys |
May |
2023 |
Characterization and corrosion evaluation of high entropy TixNb0.5MnMo0.5Zr0.3 (x=0.5, 0.75, 1) thin films for biomedical applications |
March |
2023 |
The effects of pore size and heat treatment on compression and corrosion behaviors of Ti-6Al-4V sheet-based gyroid implants fabricated by laser powder-bed fusion process |
September |
2023 |
The effects of pore size and heat treatment on compression and corrosion behaviors of Ti-6Al-4V sheet-based gyroid implants fabricated by laser powder-bed fusion process |
September |
2023 |
Oxidation Behavior of Overlay NiCoCrAlY and Diffusion Aluminide Coatings Deposited on a Directionally Solidified Nickel-Based Superalloy: A Comparative Study |
January |
2023 |
Simulation and experimental analysis of nanoscale precipitation during ageing treatment of laser powder-bed fusion fabricated IN718 Ni-based superalloy |
September |
2022 |
An investigation on the microstructure and compression properties of laser powder-bed fusion fabricated Hastelloy X Ni-based superalloy honeycomb structures |
September |
2022 |
Effect of nitrogen addition and aging treatment on microstructure and high temperature mechanical properties of Ti-48Al-2Cr-2Nb (at.%) intermetallic alloy |
May |
2022 |
Effect of solution treatment on microstructure and stress rupture properties of precipitation hardened IN718 superalloy fabricated by laser powder-bed fusion process |
November |
2022 |
Graphene Oxide Decorated with Gold Enables Efficient Biophotovolatic Cells Incorporating Photosystem I |
March |
2022 |
Effect of hafnium addition on microstructure and room temperature mechanical properties of the Ti-48Al-2Cr-2Nb intermetallic alloy |
October |
2022 |
Investigation of microstructure-tensile behavior relationship in Hastelloy X Ni-based superalloy processed by laser powder-bed fusion: Insights into the elevated temperature ductility loss |
August |
2021 |
A semi-analytical approach on critical thermal states in water wall tubes of a subcritical drum boiler of a thermal power plant |
December |
2021 |
The novel immobilization of G-quadruplex aptamer on Cu deposited surface using electrochemical method |
January |
2021 |
Fullerenes Enhance Self-assembly and Electron Injection of Photosystem I in Biophotovolatic Devices |
September |
2021 |
Effect of Hf addition on solidification and hot isostatically pressed microstructures of the Ti-48Al-2Cr-2Nb (at.%) intermetallic alloy |
April |
2021 |
Design of a hot deformation processing map for a Ni-free, N-bearing austenitic stainless steel |
April |
2021 |
Contribution of hot isostatic pressing on densification, microstructure evolution, and mechanical anisotropy of additively manufactured IN718 Ni-based superalloy |
August |
2021 |
Performance enhancement of mesoscopic perovskite solar cells with GQDs-doped TiO2 electron transport layer |
May |
2020 |
Effect of Ta/W ratio on microstructural features and segregation patterns of the single crystal PWA1483 Ni-based superalloy |
October |
2020 |
Effect of Intercritical Annealing on Microstructure and Tensile Properties of an Ultrafine Grained Dual Phase Low Alloy Steel Containing Titanium |
May |
2020 |
The role of GQDs additive in TiO2 nanorods as an electron transfer layer on performance improvement of the perovskite solar cells |
March |
2020 |
Poly (caprolactone)-poly (N-isopropyl acrylamide)-Fe3O4 Magnetic Nanofibrous Structure with Stimuli Responsive Drug Release |
July |
2020 |
Microstructural and mechanical anisotropy of selective laser melted IN718 superalloy at room and high temperatures using small punch test |
April |
2020 |
Effect of N addition on microstructure and high temperature mechanical properties of Ti-48Al-2Cr-2Nb (at. %) intermetallic alloy |
December |
2020 |
A multifunctional nanocomposite spray dressing of Kappa-carrageenan-polydopamine modified ZnO/L-glutamic acid for diabetic wounds |
March |
2020 |
Cobalt Doped Magnetite Nanoparticles: Synthesis, Characterization, Optimization and Suitability Evaluations for Magnetic Hyperthermia Applications |
February |
2020 |
Enhanced performance of planar perovskite solar cells using TiO2/SnO2 and TiO2/WO3 bilayer structures: roles of the interfacial layers |
September |
2020 |
Structural and electrical investigation of Cobalt doped NiOx/perovskite interface for efficient inverted solar cells |
April |
2020 |
Effect of N addition on microstructure refinement and high temperature mechanical properties of Ti-46Al-8Ta (at. %) intermetallic alloy |
March |
2020 |
Failure investigation of water wall tubes in a drum boiler of a thermal power plant |
December |
2020 |
Insight to the influence of Ti addition on the strain-induced martensitic transformation in a high (ca. 7 wt.%) Mn stainless steel |
April |
2020 |
Sprayable and injectable visible-light Kappa-carrageenan hydrogel for in-situ soft tissue engineering |
October |
2019 |
Effect of Mn addition on the structural and magnetic properties of Zn-ferrite nanoparticles |
July |
2019 |
Electrochemical molecularly bioimprinted siloxane biosensor on the basis of core/shell silver nanoparticles/EGFR exon 21 L858R point mutant gene/siloxane film for ultra-sensing of Gemcitabine as a lung cancer chemotherapy medication |
December |
2019 |
Developing high-strength, ductile Ni-free Fe-Cr-Mn-C-N stainless steels by interstitial-alloying and thermomechanical processing |
May |
2019 |
On the microstructure and solidification behavior of N-bearing Ti-46Al-8Ta (at. %) intermetallic alloys |
October |
2019 |
On the reversion and recrystallization of austenite in the interstitially alloyed Ni-free nano/ultrafine grained austenitic stainless steels |
February |
2019 |
Effect of thermomechanical treatment on the microstructures and mechanical properties of an ultrafine grained steel using bainite starting microstructure |
June |
2019 |
Superelastic behavior of nanostructured Ti50Ni48Co2 shape memory alloy with cold rolling processing |
July |
2018 |
Diagnosis of EGFR exon21 L858R point mutation as lung cancer biomarker by electrochemical DNA biosensor based on reduced graphene oxide/functionalized ordered mesoporous carbon/Ni-oxytetracycline metallopolymer nanoparticles modified pencil graphite elect |
April |
2018 |
Effects of withdrawal rate and starter block size on crystal orientation of a single crystal Ni-based superalloy |
March |
2018 |
Investigation and regulation of self-assembled, well-ordered nano/microstructures via an aromatic a-amino acid |
June |
2018 |
Low-temperature Nb-doped SnO2 electron selective contact yields over 20% efficiency in planar perovskite solar cells |
March |
2018 |
Peptide modified paper based impedimetric immunoassay with nanocomposite electrodes as a point-of-care testing of Alpha-fetoprotein in human serum |
July |
2018 |
PEG coated Zn0.3Fe2.7O4 nanoparticles in the presence of <alpha>Fe2O3 phase synthesized by citric acid assisted hydrothermal reduction process for magnetic hyperthermia applications |
June |
2018 |
Optimizing grain selection design in the single crystal solidification of Ni-based superalloys |
October |
2018 |
Superelastic properties of nanocrystalline NiTi shape memory alloy produced by thermomechanical processing |
March |
2018 |
On the hot deformation behavior of a Ni-free austenitic stainless steel interstitially-alloyed with low nitrogen content |
December |
2018 |
Effect of TiO2 morphology on structure of TiO2-graphene oxide nanocomposite synthesized via a one-step hydrothermal method |
October |
2017 |
The effect of Nb on texture evolutions of the ultrafine-grained dual-phase steels fabricated by cold rolling and intercritical annealing |
February |
2017 |
Evaluation of Lipton–Glicksman–Kurz Model for Free Dendritic Growth Under an Applied Electric Field |
February |
2017 |
On the precipitation hardening of the directionally solidified GTD-111 Ni-base superalloy: Microstructures and mechanical properties |
February |
2017 |
Effects of hydrothermal process parameters on the physical, magnetic and thermal properties of Zn0.3Fe2.7O4 nanoparticles for magnetic hyperthermia applications |
May |
2017 |
Effect of withdrawal rate transition on microstructural features of a single crystal Ni-based superalloy |
May |
2017 |
Microstructural and weldability analysis of Inconel 617/AISI 310 stainless steel dissimilar welds |
August |
2016 |
Kinetics of Ferrite Recrystallization and Austenite Formation During Intercritical Annealing of the Cold-Rolled Ferrite/Martensite Duplex Structures |
March |
2016 |
A comparison on the EBSD and RO-XRD techniques for measuring crystal orientation of the single crystal Ni-based superalloys |
August |
2016 |
Deformation-induced martensitic transformation in a 201 austenitic steel: The synergy of stacking fault energy and chemical driving force |
January |
2016 |
Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide |
September |
2016 |
Determination of processing maps for the warm working of vanadium micro-alloyed eutectoid steel |
March |
2016 |
Effects of applied electric current on the tip radius and the universal amplitude coefficient of a single growing dendrite |
January |
2016 |
Development of a high strength and ductile Nb-bearing dual phase steel by cold-rolling and intercritical annealing of the ferrite-martensite microstructures |
March |
2016 |
Influence of prior cold-rolling reduction on microstructure and mechanical properties of a reversion annealed high-Mn austenitic steel |
January |
2016 |
Correlation of microstructure and strain hardening behavior in the ultrafine-grained Nb-bearing dual phase steels |
December |
2016 |
Effect of Post-Weld Heat Treatment on Mechanical and Corrosion Behaviors of NiTi and Stainless Steel Laser-Welded Wires |
June |
2016 |
Characterization of Pure Ni Ultrafine/Nanoparticles Synthesized by Electromagnetic Levitational Gas Condensation Method |
February |
2016 |
Effect of N on phase transformations during martensite thermomechanical processing of the nano/ultrafine-grained 201L steel |
December |
2016 |
Effect of initial microstructure on the work hardening behavior of plain eutectoid steel |
April |
2015 |
Warm deformation processing maps for the plain eutectoid steels |
March |
2015 |
A microstructural investigation on deformation mechanisms of Fe–18Cr–12Mn–0.05C metastable austenitic steels containing different amounts of nitrogen |
October |
2015 |
An investigation on microstructure and mechanical properties of a Nb-microalloyed nano/ultrafine grained 201 austenitic stainless steel |
June |
2015 |
Microstructure and mechanical properties of nano/ultrafine-grained N-bearing, low-Ni austenitic stainless steels |
February |
2015 |
Development of a new ultrafine/ nano ferrite -carbide microstructure by thermomechanical processing |
February |
2015 |
Microstructure, Cyclic Deformation and Corrosion Behavior of Laser Welded NiTi Shape Memory Wires |
July |
2015 |
Nanoindentation study of ferrite-martensite dual phase steels developed by a new thermomechanical processing |
July |
2015 |
Design, fabrication and testing of an apparatus for in-situ investigation of free dendritic growth under an applied electric field |
April |
2015 |
Strengthening mechanisms of ultrafine grained dual phase steels developed by new thermomechanical processing |
January |
2015 |
Effects of applied electric current on the tip radius and the universal amplitude coefficient of a single growing dendrite |
August |
2015 |
Microstructures, Mechanical Properties, and Strain Hardening Behavior of an Ultrahigh Strength Dual Phase Steel Developed by Intercritical Annealing of Cold-Rolled Ferrite/Martensite |
July |
2015 |
Correlation of mechanical properties with fracture surface features in a newly developed dual phase steel |
April |
2015 |
Nanocrystallization of the Ti50Ni48Co2 shape memory alloy by thermomechanical treatment |
January |
2015 |
Influence of Nb-microalloying on formation of nano/ultrafine grained microstructure and mechanical properties during martensite reversion process in a 201-type austenitic stainless steel |
August |
2015 |
Preferred crystallographic orientation development in nano/ultrafine grained 316L stainless steel during martensite to austenite reversion |
February |
2015 |
Investigating the effects of short time austenitizing and cooling rate on pearlitic microstructure and mechanical properties of a hot rolled plain eutectoid carbon steel |
February |
2015 |
Effect of Nb on microstructures and mechanical properties of an ultrafine-grained dual phase steel |
August |
2015 |
Effects of initial microstructure and thermomechanical processing parameters on microstructures and mechanical properties of ultrafine grained dual phase steels |
August |
2014 |
The effects of multi-cyclic thermo-mechanical treatment on the grain refinement and tensile properties of a metastable austenitic steel |
January |
2014 |
Effect of nitrogen content on grain refinement and mechanical properties of a reversion treated Ni-free 18Cr-12Mn austenitic stainless steel |
December |
2014 |
Investigation of the effect of grain size on the strain-induced martensitic transformation in a high-Mn stainless steel using nanoindentation |
August |
2014 |
Fabrication of the ultrafine-grained ferrite with good resistance to grain growth and evaluation of its tensile properties |
January |
2014 |
Constitutive model for describing flow behaviour of Fe–18Cr–10Mn–0·39N austenitic stainless steel |
March |
2014 |
Design of a new Ni-free austenitic stainless steel with unique ultrahigh strength-high ductility synergy |
November |
2014 |
Effect of annealing temperature on nano/ultrafine grain of Ni-free austenitic stainless steel |
January |
2014 |
Formation of the Nanocrystalline Structure in an Equiatomic NiTi Shape-Memory Alloy by Thermomechanical Processing |
April |
2014 |
Influence of precooling and deformation temperature on microstructure and mechanical properties in a high-manganese austenitic steel |
September |
2014 |
Formation of nano/ultrafine grain structure in a Ti-modified 201L stainless steel through martensite thermomechanical treatment |
April |
2014 |
The effect of cold rolling and annealing on microstructure and tensile properties of the nanostructured Ni50Ti50 shape memory alloy |
June |
2014 |
Microstructural investigation on deformation behavior of high purity Fe-Cr-Ni austenitic alloys during tensile testing at different temperatures |
November |
2014 |
The effect of thermomechanical processing on the microstructure and mechanical properties of the nanocrystalline TiNiCo shape memory alloy |
March |
2014 |
Enhanced mechanical properties in a High-manganese austenitic steel through formation of nano grains, nanotwinned austenite grains, nano carbides and TRIP |
July |
2014 |
A novel route for development of ultrahigh strength dual phase steels |
December |
2014 |
Formation of the Nanocrystalline Structure in an Equiatomic NiTi Shape-Memory Alloy by Thermomechanical Processing |
December |
2013 |
Investigation of Cold Rolling Variables on the Formation of Strain-Induced Martensite in 201L Stainless Steel |
April |
2013 |
Application of Martensitic Transformation Fundamentals to Select Appropriate Alloys for Grain Refining through Martensite Thermomechanical Treatment |
August |
2013 |
Influence of Ti microalloying on the formation of nanocrystalline structure in the 201L austenitic stainless steel during martensite thermomechanical treatment |
November |
2013 |
Laser welding of NiTi shape memory alloy: Comparison of the similar and dissimilar joints to AISI 304 stainless steel |
December |
2013 |
Influence of nitrogen alloying on properties of Fe-18Cr-12Mn-XN austenitic stainless steels |
December |
2013 |
Microstructure and mechanical properties of friction stir welded lean duplex stainless steel |
January |
2013 |
Comparative Study on Microstructure and Homogeneity of NiTi Shape Memory Alloy Produced by Copper Boat Induction Melting and Conventional Vacuum Arc Melting |
February |
2012 |
Synthesis of aqueous ferrofluids of ZnxFe3−xO4 nanoparticles by citric acid assisted hydrothermal-reduction route for magnetic hyperthermia applications |
July |
2012 |
Effects of thermo-mechanical parameters on microstructure and mechanical properties of Ti-50at.%Ni shape memory alloy produced by VAR method |
February |
2012 |
The improvement of ductility in nano/ultrafine grained low carbon steels via high temperature short time annealing |
May |
2012 |
Bulk synthesis of ZnO nanoparticles by the one-step electromagnetic levitational gas condensation method |
January |
2012 |
Effect of process parameters on microstructures and mechanical properties of a nano/ultrafine grained low carbon steel produced by martensite treatment using plane strain compression |
March |
2012 |
Formation of nano/ultrafine grain structure in a 201 stainless steel through the repetitive martensite thermomechanical treatment |
December |
2012 |
Processing of nano/submicron grained stainless steel 304L by an advanced thermomechanical process |
January |
2012 |
Synthesis of High Intrinsic Loss Power Aqueous Ferrofluids of Iron Oxide Nanoparticles by Citric Acid (CA) Assisted Hydrothermal-Reduction Route |
March |
2012 |
The Effect of Process Parameters on the Synthesis of Ti and TiO2 Nanoparticles Producted by Electromagnetic Levitational Gas Condensation |
January |
2012 |
Three-dimensional simulation of quenching process of plain carbon steel gears incorporating phase transformations |
February |
2012 |
Producing the nano/ultrafine grained low carbon steel by martensite process using plane strain compression |
February |
2011 |
Application of polymeric quenchant in heat treatment of crack-sensitive steel mechanical parts: modeling and experiments |
May |
2011 |
Effect of reversion annealing on the formation of nano/ultrafine grained structure in 201 austenitic stainless steel |
December |
2011 |
Producing the nano/ultrafine grained low carbon steel by martensite process using plane strain compression |
February |
2011 |
The effect of bainite in producing nano/ultrafine grained steel by the martensite treatment |
April |
2011 |
Investigating microstructural evolution during homogenization of the equiatomic NiTi shape memory alloy produced by vacuum arc remelting |
October |
2011 |
Characterization of Microstructures and Mechanical Properties of Inconel 617/310 Stainless Steel Dissimilar Welds |
April |
2011 |
The influence of reversion annealing behavior on the formation of nanograined structure in AISI 201L austenitic stainless steel through martensite treatment |
September |
2011 |
Electromagnetic-thermal coupled simulation of levitation melting of metals |
February |
2011 |
Production of nano/ultrafine grained AISI 201L stainless steel through advanced thermo-mechanical treatment |
June |
2011 |
Electromagnetic-thermal coupled simulation of levitation melting of metals |
February |
2011 |
Formation mechanism of ZnO nanorods produced by the electromagnetic levitational gas condensation method |
June |
2011 |
Microstructural investigation on strengthening mechanisms of AISI 304L austenitic stainless steel during cryogenic deformation |
December |
2011 |
Optimizing the electrode position in sacrificial anode cathodic protection systems using boundary element method |
March |
2010 |
Microstructural Evolution In A Low Carbon Steel During Cold Rolling And Subsequent Annealing |
September |
2010 |
Influence of Mould Design on the Solidification of Heavy Forging Ingots of Low Alloy Steels by Numerical Simulation |
March |
2010 |
Nanoporous Titania-Coated Alumina Membranes: Sol-Gel Synthesis And Characterisation |
September |
2010 |
Production of nano/submicron grained AISI 304L stainless steel through the martensite reversion process |
October |
2010 |
Numerical Simulation and Experimental Investigation of Residual Stresses in the Circumferential Butt GTAW of Incoloy800H Pipes |
January |
2010 |
Numerical simulation and experimental investigation of temperature distribution in the circumferentially butt GTAW of Incoloy 800H pipes |
July |
2010 |
Numerical simulation and experimental investigation of temperature and residual stresses in GTAW with a heat sink process of Monel 400 |
October |
2010 |
The Effect of Cold Rolling Regime on Microstructure and Mechanical Properties of AISI 304L Stainless Steel |
July |
2010 |
Effects of process parameters on synthesis of Zn ultrafine/nanoparticles by electromagnetic levitational gas condensation |
September |
2010 |
Calculation and experimentation of the compound layer thickness in gas and plasma nitriding of iron |
May |
2010 |
Synthesis of Aluminum Nanoparticles By Electromagnetic Levitational Gas Condensation Method |
September |
2010 |
Formation of nanocrystalline structure in 301 stainless steel produced by martensite treatment |
September |
2009 |
Numerical simulation of continuous cooling of a low alloy steel to predict microstructure and hardness |
April |
2009 |
Effect of Martensite to Austenite Reversion on the Formation of Nano/Submicron Grained AISI 301 Stainless Steel |
November |
2009 |
Potential Application of Nanocrystalline 301 Austenitic Stainless Steel in Lightweight Vehicle Structures |
October |
2009 |
Effect of solution annealing on weldability of aged alloy 800/25Cr-35Ni steel dissimilar welds |
June |
2008 |
Three-dimensional Thermal Simulation and Experimental Investigation of GTAW Circumferentially Butt-welded Incoloy 800 Pipes |
April |
2008 |
Synthesis and Characterisation of Microporous Titania Membranes by Dip-coating of Anodised Alumina Substrates using Sol-Gel Method |
August |
2008 |
Improvement of grain structure and mechanical properties of a land based gas turbine blade directionally solidified with liquid metal cooling process |
January |
2008 |
Artificial Neural Network Modeling of High Pressure Descaling Operation in Hot Strip Rolling of Steels |
July |
2008 |
Numerical Thermal Simulation of Graphite Electrode in an EAF during Normal Operation |
June |
2008 |
Numerical Simulation and Experimental Investigation of the Failure of a Gas Turbine Compressor Blade |
June |
2008 |
Improving weldability of the aged 25Cr-35Ni heat resistant steel/alloy 800 dissimilar welds |
July |
2007 |
An Investigation on Failure Analysis of Titanium Gas Turbine Compressor Blades |
October |
2007 |
A Novel Analytical-artificial Neural Network Model to Improve Efficiency of High Pressure Descaling Nozzles in Hot Strip Rolling of Steels |
August |
2007 |
Integrated Modeling for the Manufacture of Ni-Based Superalloy Discs from Solidification to Final Heat Treatment |
September |
2005 |
A Scalable, Continuous Variable, Cellular Automaton Model for Grain Growth during Homogenisation of Vacuum Arc Remelted INCONEL 718 |
July |
2003 |
Simulation of Dendritic Growth in the Platform Region of Single Crystal Superalloy Turbine Blades |
May |
2003 |
A Microstructural Model of Competitive Growth in Nickel Based Superalloys |
March |
2002 |
Thermal and Grain Structure Simulation of a Land-based Gas Turbine Blade Directionally Solidified with the Liquid Metal Cooling Process – Reply to Discussion |
June |
2001 |
Thermal and Grain Structure Simulation of a Land-based Gas Turbine Blade Directionally Solidified with the Liquid Metal Cooling Process |
December |
2000 |
Directional Solidification of the Ni-based Superalloy IN738LC to Improve Creep Properties |
May |
2000 |